Share mechanistic information on all types of heavy vehicles such as construction machinery, buses or trucks. You can upload and download ...
Well, like the last post, I have to "autoresponder" for the absence of help. . For those novice mechanics like me, who are looking for answers here from the experts, investigate the problem further. The teeth of the press, as the screws are tightened, should be lowered to no less than 7 or 10 mm from the flywheel (depending on each vehicle model). This movement is what allows the press to keep the clutch disc pressed against the steering wheel, as the disc is worn out with use. If when mounting a disc and tightening the nuts of the press, the teeth remained in the same place without descending, when starting the engine, there would simply be no traction, what it would do is slide when releasing the clutch. If, on the contrary, the teeth descend too much, remaining stuck to the steering wheel (which was my case), because there will be nothing that the collar can move, therefore the car will not have a clutch, the disc always being pressed against the steering wheel. This happens for two reasons, the first is that the press is not working well, or that the paste of the disc is very thick, forcing the teeth to fall too low. This was what I could find out about my doubt. I hope this information is useful to someone.
Read More ..
- Red social
- Automotive News
- MDM News